Rubber conveyor belt

Rubber conveyor belt

ORDER NOW

×

REQUEST VIET PHAT PRODUCT CONSULTANT Rubber conveyor belt

Leave your information, a Viet Phat consultant will call you immediately!

Successful submission! We will get back to you within 24 hours.

Rubber conveyor belt technical features are listed according to the most basic points below:

 

bang
Some common rubber conveyor designs

The rubber conveyor belt has a high lateral degree, the surface is heat resistant, so there is no blistering phenomenon like the pvc conveyor line. Rubber conveyor belts come in a variety of conveyor face designs suitable for many different technical applications.

 

Rubber conveyor belts have heat resistance, have good adhesion between layers, often do not occur layering phenomenon between the rubber coating and the layers during long-term use.

 

bang
Cross section cross-section of a 10mm thick rubber conveyor belt with 04 EP layers

 

The rubber conveyor core can be EP overlays. It is the most common structure. To reinforce, increase tensile strength, increase load, one can replace the EP layer with wire mesh, steel cable, or a combination of EP layers and wire mesh, steel cables.

 

The rubber conveyor belt surface is highly resistant to abrasion friction. The wear rate of the upper rubber layer, ie the surface of the conveyor in direct contact with the material load, occurs more slowly than the other conveyor belts. Also means higher resistance to mechanical friction. Some rubber conveyors are 10mm thick, have 3 layers, 4 layers, or 5 layers, so depending on the actual application requirements to choose, it does not mean that as many layers as possible. Commonly used rubber belt thicknesses: 5mm, 8mm, 10mm. V-ribs of rubber belts are usually 5mm high. Venh V is the most commonly used rubber conveyor belt line in Vietnam, has the effect of increasing friction on the conveyor surface when loading materials up and down the slope.

 

EP conveyor layer, depending on high and low EP index, usually runs from EP100 to EP5000, the ability to withstand different tensile forces and is often much higher than other conveyor belts, so the belt is less stretched during operation. . The higher the EP index per layer, the less the belt will stretch.

 

Rubber conveyor belts have good adhesion between layers, so it is very difficult to lay out and separate layers, the service life is usually longer than other conveyor belts. Common application with average working intensity, rubber conveyor belt life is usually four to five years.

 

Like PVC conveyor belt, PU conveyor belt, rubber conveyor belt also has design of pressing and gluing rubber conveyor belt to load bulk cargo, bulk cargo, load up and down slope …

 

The weak point is that the rubber conveyor belt is thick and hard, difficult to use in light industries that require sophistication and precision.

 

To find out, consult and order rubber conveyor belts, you can contact hotline Viet Phat Sales Department: 0912136739 – 0933235588.

 

Thank you very much!

Xem thêm